The SS10 is designed to work with most vehicles that are equipped with non-mechanical transmission sensors (no speedometer cable). This interface amplifies and conditions the pulses emitted from your vehicle’s speed sensor and supplies the signal to the Nitestar NS-50 / 60 display unit to accurately compute traveled distances.
The SS10 is an intelligent design. Sensitivity level, division factor, and diagnostics are controlled by six momentary push buttons. Two, seven segment LEDs display the sensitivity and divisor settings. When power is initially applied to the SS10, the factory default settings are displayed for 5 seconds. When the LEDs are on, the SS10 is in “Adjust Mode” and the user can change the default settings and execute diagnostics. The SS10 will stay in Adjust Mode until the user has not pressed a push button for 5 seconds. The LEDs will then be turned off and 2 seconds later, the SS10 will enter “Run Mode”. Run Mode is the normal mode for operation. When you need to make an adjustment or execute diagnostics, press and release any push button (SW1-SW6). The SS10 will enter Adjust Mode and the LEDs will display the current settings.
We operate in 5 regional warehouses to provide you a fast and reliable delivery service
From highway signing and safety products to crash cushions and traffic monitoring equipment.
If you need assistance, a member of our friendly staff will be always happy to help you.